Janome 6234XL Overlocker
The Janome 6234XL has 2 needles and 2, 3 or 4 thread overlock stitching. Threading is made simple due to color-coded thread guides and a self-threading lower looper. You can also quickly switch to rollex hemming without changing the needle plate.
Weights just 8kgs
Key Features
2, 3, or 4 thread overlock
Lay-in thread tension dial
Seam width: 1 - 5mm
Seam length3.3mm (narrow), 7.5mm (wide) 2.0mm
Rolled hem
Slim foot
Handy needle threader
Convenient thread cutter
Easy rolled hem change-over
0.5 - 2.2 differential feed ratio
Easy upper knife release
Adjustable cutting width: 3.1 - 5.1mm
Easy lower looper threading
Differential feed
Lower looper pre-tension setting slider
Changeable thread guide
Front and back needle guard
Retractable upper knife
Numbered tension dials
Color-coded thread guides
Snap-on presser feet
Technical Specifications
Lay-in Tension Dial
2, 3, and 4 Thread Convertible
Maximum Speed: 1,300 spm
Incorporated Tension Release Device
Incorporated EZ Change Rolled Hem
Adjustable Foot Pressure (Adjusting Screw)
Snap-on Presser Foot
Feed Adjustment: Dial on Belt Cover (with Window)
Differential Feed Adjustment: Dial on Belt Cover (with Window) Dial Cutting Width Adjustment
Aligned Spool Pin Spool Stand
Thread Cutter
Differential Feed Ratio: 0.5 to 2.25
Cutting Width: 3.1 - 7.3mm
Waste chip Box
Accessory Box
Standard Accessories
-
Standard Foot
-
Tweezers
-
Needle Threader
-
Spool Cones - 4
-
Spool Holders - 4
-
Spool Nets - 4
-
Spreader
-
Spare Upper Knife
-
Screwdrivers - Large & Small
-
Spanner
-
Needles - Ballpoint
-
Lint Brush
-
Oil