Genuine Pfaff Multi-line Decorative Foot 821082-096
Use the Multi-line Decorative foot to create even spacing borders with decorative stitches, or as a guide when sewing omnimotion and side-motion stitches. Guidelines are provided for accurately turning corners of ¼” (6 mm) and ½” (12 mm) measurements.
Decorative borders:
-
Thread your machine with sewing thread or decorative thread on top and sewing thread in the bobbin.
-
Choose a decorative stitch.
-
Snap on the Multi-line Decorative foot.
-
Mark a line on the fabric with a Pictogram Pen where the center of the stitching will be.
-
Place Tear-Away Stabiliser under the fabric.
-
Line up the presser foot on the marked line using the red center line on the foot. Sew the first row of your decorative stitching.
-
Choose another decorative stitch.
-
Move your fabric to the left. Decide what distance you’d like to have between the rows.
-
Use the red horizontal lines to match up the start of each row.
-
Sew the next line of stitching using the red lines on the foot as a guide while sewing.
-
Mirror image the stitch and move your fabric to the right side of the center stitch. Sew the seam on the right side.
-
Continue with more stitches to create a wider border.
-
Tear away the stabiliser.
Omnimotion or side-motion stitches:
-
Thread your machine with sewing thread or decorative thread on top and sewing thread in
-
the bobbin.
-
Choose an Omnimotion or side-motion stitch.
-
Snap on the Multi-line Decorative foot.
-
To ensure a straight line of stitching draw a line on the fabric with your Pictogram Pen where the center of the stitching will be. Continue to mark one or two lines on each side of the drawn line.
-
Place the fabric with Tear-Away Stabiliser under the presser foot.
-
Sew carefully and let the machine control the feeding.
-
Keep the marked lines and the vertical red lines on both sides of the presser foot parallel to each other when sewing.
-
Tear away the stabiliser.
Suitable for use with machines with one of the following codes: B, C, D, E, F, G, J, K, L
